New restrictions on PFCAs and MCCPs under the EU POPs Regulation

The European Union is strengthening its regulatory framework for persistent organic pollutants (POPs) with two new measures amending Annex I to Regulation (EU) 2019/1021. The amendments introduce further restrictions on certain chemicals that are highly persistent in the environment.
The amendments, introduced by Commission Delegated Regulations (EU) 2026/1972 and 2026/2035, concern long-chain perfluorocarboxylic acids (PFCAs) and medium-chain chlorinated paraffins (MCCPs), respectively.
PFCA restrictions extended to C15–C21 perfluorocarboxylic acids

Commission Delegated Regulation (EU) 2026/1972 adds C9–C21 PFCAs, their salts and related compounds to Annex I to the POPs Regulation.

C9–C14 PFCAs were already subject to restrictions under entry 68 of Annex XVII to the REACH Regulation. The new measure extends restrictions to C15–C21 PFCAs.

The new regulation sets the following general limits for the presence of these substances as unintentional trace contaminants in substances, mixtures and articles:

  • 0.025 mg/kg for the sum of C9–C21 PFCAs and their salts.
  • 0.26 mg/kg for the sum of C9–C21 PFCA-related compounds.

Specific provisions and exemptions apply to certain uses, including fluoroplastics, fluoroelastomers, PTFE micropowders, firefighting foams and certain electronic components.

New restrictions on medium-chain chlorinated paraffins

Commission Delegated Regulation (EU) 2026/2035 adds medium-chain chlorinated paraffins (MCCPs) to Annex I to the POPs Regulation. MCCPs are used in various industrial applications, primarily as plasticisers and flame retardants, and may be present in plastics, PVC, rubber, adhesives, sealants and coatings.

A general limit of 1,000 mg/kg (0.1% by weight) applies to the presence of MCCPs as unintentional trace contaminants in substances, mixtures and articles.

The regulation also provides for exemptions and transitional periods for specific industrial uses, including certain recycled materials, flexible PVC components, adhesives, sealants and specialised technical applications.

What does this mean for companies?

The new restrictions may affect a range of industries, including textiles, apparel, footwear, plastics, components and consumer products.

As the POPs Regulation covers more substances, companies need to check whether PFCAs and MCCPs are present in their materials and finished products. This includes looking closely at chemical formulations, surface treatments and components used throughout the supply chain.

Companies should therefore update their chemical compliance procedures by reviewing information provided by suppliers and carrying out targeted laboratory testing where necessary.

When do the new rules apply?

Both regulations apply from 16 December 2026, subject to specific exemptions and transitional provisions for certain uses.

The amendments further strengthen EU rules on persistent chemicals, with the aim of gradually reducing their presence in products and the environment.

Analytical Group helps companies interpret regulatory requirements and verify the chemical compliance of materials and products through advisory services and laboratory testing.

 
 

Insights.

CONTACT
US

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua enim ad minim veniam.

WordPress Appliance - Powered by TurnKey Linux